Subject: RE: [IBIS-Users] LVDS modeling method
From: Hegazy, Hazem (hazem_hegazy@mentorg.com)
Date: Wed Aug 28 2002 - 01:45:24 PDT
Hi,
Could please clarify the question? The common mode voltage is very
important for the model generation and which method to use. While the Vod is
a model parameter and you can even put it in the model after finishing all
current/wave form tables.
Hazem Hegazy
-----Original Message-----
From: Shee Kian Wong [mailto:SKWONG@altera.com]
Sent: Wednesday, August 28, 2002 10:40 AM
To: ibis-users@server.eda.org
Subject: [IBIS-Users] LVDS modeling method
Hi all,
I've seen a lot of LVDS modeling methods only take care of vos (output
offset voltage) or vcm (common mode voltage).
But how come very seldom people make use of vod (output differential
voltage)? Isn't as important as other parameters?
Please advice.
BM__MailAutoSigBest Regards,
Shee Kian Wong
Applications Engineer,
Altera Corporation (M) Sdn. Bhd.
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993
This archive was generated by hypermail 2b28 : Wed Aug 28 2002 - 02:03:48 PDT