[IBIS-Users] HSPICE(.rlc/.sp) files

Subject: [IBIS-Users] HSPICE(.rlc/.sp) files
From: Suchitha.V@smartm.com
Date: Wed Aug 28 2002 - 08:39:06 PDT

• Next message: Nirav Patel: "[IBIS-Users] IBIS issue at high frequencies"
• Previous message: Hegazy, Hazem: "RE: [IBIS-Users] LVDS modeling method"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi All,

I have some package model information in the following formats

     Format: HSPICE W Element (.rlc)
     Format: HSPICE (.sp)

I'm using XTK/ScratchPad from Innoveda for SI analysis.

I would like to know the method to include the package files in HSPICE format
along with the IBIS buffer model of the component,
in the topology created in ScratchPad/XTK

Or

Is there a conversion tool available to convert HSPICE model into IBIS/QUAD
format (input format for XTK).
Can anyone please suggest a method to include the package model information?

Thanking you in advance

Thanks & Regards
Suchitha,

|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993

• Next message: Nirav Patel: "[IBIS-Users] IBIS issue at high frequencies"
• Previous message: Hegazy, Hazem: "RE: [IBIS-Users] LVDS modeling method"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b28 : Wed Aug 28 2002 - 09:59:24 PDT