Subject: [IBIS-Users] Repost: Using s2ibis2 in 1.65V range
From: Angulo, John (john_angulo@mentorg.com)
Date: Tue Dec 10 2002 - 11:38:18 PST
The following is posted on behalf of Dan Aleksandrowicz at Galileo Technology. Please send any private replies to dan@galileo.co.il only.
John Angulo
IBIS Open Forum Postmaster
--------------------------------------
Hi there.
I have a problem generating a an IBIS model while using 1.65V supply.
The problem is that I get different ranges from the [Pulldown] Vs.
[Pullup]
tables - 3.3->1.6 and 3.25->-1.65 receptively.
Does anyone have a solution ?
Thanks
-- "This message may contain confidential, proprietary or legally privileged information. The information is intended only for the use of the individual or entity named above. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by telephone, or by e-mail and delete the message from your computer.".|------------------------------------------------------------------ |For help or to subscribe/unsubscribe, email majordomo@eda.org |with just the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or email a written request to ibis-request@eda.org. | |IBIS reflector archives exist under: | | http://www.eda.org/pub/ibis/email_archive/ Recent | http://www.eda.org/pub/ibis/users_archive/ Recent | http://www.eda.org/pub/ibis/email/ E-mail since 1993
This archive was generated by hypermail 2b28 : Tue Dec 10 2002 - 11:48:04 PST