Subject: [IBIS-Users] IBIS for different speed grades
From: Kannan Srinivasagam (pks@cypress.com)
Date: Wed May 07 2003 - 16:29:42 PDT
Hi,
When the vendors create IBIS models are they supposed to have
three different IBIS models for the 3 process corners thus accounting
for the different speed grades
OR
Is one IBIS model sufficient with either just the typical corners
included or slow,typ,fast all included in the model.
Please advise.
Regards
Kannan Srinivasagam
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993
This archive was generated by hypermail 2b28 : Wed May 07 2003 - 16:43:24 PDT