Subject: Re: [IBIS-Users] Error while using s2ibis2
From: Syed Huq (shuq@cisco.com)
Date: Fri May 23 2003 - 22:14:11 PDT
Are you able to run the example .s2i file that comes with s2ibis2 ?
Which OS binary are you running ?
If the example runs then something is wrong with your .s2i...possibly..
Syed
>Date: Fri, 23 May 2003 11:14:02 -0700
>From: Kannan Srinivasagam <pks@cypress.com>
>X-Accept-Language: en
>MIME-Version: 1.0
>To: "ibis-users@eda.org" <ibis-users@eda.org>
>CC: aju@cypress.com
>Subject: [IBIS-Users] Error while using s2ibis2
>
>Hi,
> Could anyone tell me why I am getting the following error during my
>s2ibis2 Input model run :
>ERROR : Difficulty in Reading input
>
>I am not sure what I am doing wrong.
>
>Thanks
>Kannan Srinivasagam
>Cypress Semiconductor
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993
This archive was generated by hypermail 2b28 : Fri May 23 2003 - 22:22:09 PDT