Subject: [IBIS-Users] IBIS VMEAS and VREF Question.
From: Rick Kingen (Rick.Kingen@motorola.com)
Date: Thu Jun 19 2003 - 17:28:17 PDT
I am getting the following warning when I run my model thru the parser:
WARNING - Model 'I_O2': MIN VI curves cannot drive through Vmeas=1.5V
given load Rref=50 Ohms to Vref=0V
Can anyone enlighten me as to the significance of this warning? Will the simulator in general have a problem? The WInIBIS data looks good.
Thanks in advance.
Rick Kingen
_______________________________________________
This email communication along with any attachments
is classified as:
[ X] General business information
[ ] Motorola internal use only
[ ] Motorola confidential proprietary
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993
This archive was generated by hypermail 2b28 : Thu Jun 19 2003 - 17:29:29 PDT