[IBIS-Users] damped oscillations in V-T curve


Subject: [IBIS-Users] damped oscillations in V-T curve
From: erik.van.der.ven@philips.com
Date: Thu Jun 26 2003 - 02:43:57 PDT


Hello,

In my V-T curve I see a damped oscillation in the falling waveform (diff
PECL).
When I do a HSPICE simulation with different load resistances I observe
that the amplitude of the first peak increases dramatically while this is
not the case in a simulation of the original buffer in Spectre.
What should I do to model this behaviour correctly. And what causes this
increase in amplitude?

With kind regards,

Ir. Erik van der Ven
Room DB1032
Business Line Networking Infrastructure
Philips Semiconductors BV
Gerstweg 2
6534 AE Nijmegen
The Netherlands
Phone: +31-24-3534334
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993



This archive was generated by hypermail 2b28 : Thu Jun 26 2003 - 02:47:55 PDT