RE: [IBIS-Users] static/dynamic overshoot/undershoot definition


Subject: RE: [IBIS-Users] static/dynamic overshoot/undershoot definition
From: Muranyi, Arpad (arpad.muranyi@intel.com)
Date: Fri Oct 03 2003 - 14:17:44 PDT


Perry,

Try looking up the subparameters "Si_location" and "Timing_location"
to see if those would help you figuring out what the answer is.
I personally don't know the answer, and don't have the time to
look it up for you.

Arpad Muranyi
Intel Corporation
====================================================================

-----Original Message-----
From: Perry Qu [mailto:perry.qu@alcatel.com]
Sent: Friday, September 19, 2003 6:06 AM
To: IBIS group
Subject: [IBIS-Users] static/dynamic overshoot/undershoot definition

Hi,

Can someone let me know in IBIS spec, where the static/dynamic
overshoot/undershoot is defined ? At packaging pins or at die ?

Thanks

Perry

--
Perry Qu

Design & Qualification | 600 March Road Alcatel Canada | Ottawa, ON K2K 2E6, Canada

DID: (613) 7846720 | FAX: (613) 5993642

|------------------------------------------------------------------ |For help or to subscribe/unsubscribe, email majordomo@eda.org |with just the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or email a written request to ibis-request@eda.org. | |IBIS reflector archives exist under: | | http://www.eda.org/pub/ibis/email_archive/ Recent | http://www.eda.org/pub/ibis/users_archive/ Recent | http://www.eda.org/pub/ibis/email/ E-mail since 1993 |------------------------------------------------------------------ |For help or to subscribe/unsubscribe, email majordomo@eda.org |with just the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or email a written request to ibis-request@eda.org. | |IBIS reflector archives exist under: | | http://www.eda.org/pub/ibis/email_archive/ Recent | http://www.eda.org/pub/ibis/users_archive/ Recent | http://www.eda.org/pub/ibis/email/ E-mail since 1993



This archive was generated by hypermail 2b28 : Fri Oct 03 2003 - 14:19:54 PDT