[IBIS-Users] Eldo runs, and R,L,C package effect.


Subject: [IBIS-Users] Eldo runs, and R,L,C package effect.
From: Lior Dagan (liord@saifun.com)
Date: Thu Dec 11 2003 - 10:01:20 PST


Hello wise people.
I am running Eldo as a simulator for extracting ibis data. I use it to verify the results as well (running eldo on the circuit modeled AND on ibis model, and comparing them)
I have encountered some difficulties.
1. How does ibis determine the vinh/vinl for an output buffer? How does it decide to change states?
2. I get a large mismatch in delay, could this be the result of even spaced V/T samples?
3. I tried to change R_pkg (pins have NA on all of them) from 3m to 3E6, and it showed no effect on my eldo. Can anyone tell me why?
4. @ r_fixture=70 ohms I get a large jitter, @ r_fixture=1000, I get a much smaller jitter, how does it happen?
Thanks,
Lior Dagan.

|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993



This archive was generated by hypermail 2b28 : Thu Dec 11 2003 - 10:03:19 PST