[IBIS-Users] BIRD86.1 - Clarification of Subparameter Mode


Subject: [IBIS-Users] BIRD86.1 - Clarification of Subparameter Mode
From: Bob Ross (bob@teraspeed.com)
Date: Fri Dec 26 2003 - 13:04:15 PST


To IBIS Committee:

Based on a review of the original intention, BIRD86.1
proposes a different solution than originally issued in
BIRD86. For reference, the BIRD86 proposal is archived
as part ot the ANALYSIS ... section.

BIRD86.1 is scheduled for discussion and vote at the
January 9, 2004 IBIS meeting.

Lynne Green and Bob Ross

-- 
Bob Ross
Teraspeed Consulting Group LLC     Teraspeed Consulting Group LLC
2926 SE Yamhill St.                Device Modeling Division
Portland, OR 97214                 13610 SW Harness Lane
503-239-5536                       Beaverton, OR 97008
http://www.teraspeed.com           503-430-1065
bob@teraspeed.com                  503-246-8048 Direct


BIRD86.1.txt

|------------------------------------------------------------------ |For help or to subscribe/unsubscribe, email majordomo@eda.org |with just the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or email a written request to ibis-request@eda.org. | |IBIS reflector archives exist under: | | http://www.eda.org/pub/ibis/email_archive/ Recent | http://www.eda.org/pub/ibis/users_archive/ Recent | http://www.eda.org/pub/ibis/email/ E-mail since 1993



This archive was generated by hypermail 2b28 : Fri Dec 26 2003 - 13:05:56 PST