[IBIS-Users] Another [Pin] spec question

Hi All

I am trying to include 2 components in one model file. Is it an IBIS
requirement that the model names should not repeat between components? By
doing so I get an error on ibischk3. If it is in the spec can some one point
to the page. It is neither under [Component] nor under [Pin].

Thanks
Prabhu
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993
Received on Wed May 19 17:43:30 2004