[IBIS-Users] xtal inputs

From: RODRIGUEZ_LECONA_RAMIRO <rlecona_at_.....>
Date: Fri Apr 01 2005 - 09:36:50 PST
Hi all, 

Is there any special requirement for xtal inputs from IBIS point of view? Or 
simply I have to specify the xtal inputs like a differential pins and 
include the clamps curves? 

Thanks. 

Ramiro
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993
Received on Fri Apr 1 09:24:38 2005

This archive was generated by hypermail 2.1.8 : Fri Apr 01 2005 - 09:26:46 PST