[IBIS-Users] DC sweep

From: Subramanian, Sivaramakrishnan \(Sivaramakrishnan\) <sivaram_at_.....>
Date: Tue Jul 05 2005 - 05:00:50 PDT
Hi all,

How can I extract V-I curves when the O/P of my buffer is edge-triggered
and not level-sensitive?

Basically, I have to do DC sweep to extract these curves.But I cannot 
connect my inputs to steady voltage values as the O/P is edge-triggered,
which
needs transient analysis.

Would anyone of you please let me know how to go about these buffers to
extract
VI curves?

Thanks in advance,
Sivaram

 

|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993
Received on Tue Jul 5 05:01:24 2005

This archive was generated by hypermail 2.1.8 : Tue Jul 05 2005 - 05:02:17 PDT