[IBIS-Users] Differential Buffer Modelling

From: Kong Yew Chan <KYCHAN_at_.....>
Date: Mon Oct 03 2005 - 06:21:29 PDT
IBIS Gurus,

 

I have some questions about generating differential buffer model as
stated in latest Cookbook 4.0.

1)          My normalized differential mode current has a similar plot
as shown in Pg 36. It's a function of the differential voltage, so that
makes the usage of keyword [Series Current] appropriate in this case. To
fill the I-V table, am I supposed to use the Vdiff vs Idiff ?

2)          For the V-T table data extraction, it was mentioned in Pg 40
that for [Series Current] keyword, PWL current source can be used to
replace the R value. What should be the PWL response to represent the
Idiff? (Idiff was only found to be a function of Vdiff from I-V
extraction). 

 

Please advise if my assumptions are incorrect.  

 

Thanks

Kong-Yew



|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993
Received on Mon Oct 3 06:21:55 2005

This archive was generated by hypermail 2.1.8 : Mon Oct 03 2005 - 06:24:45 PDT