[IBIS-Users] Fork-Endfork in IBIS EBD Models

Hi All,
When creating IBIS EBD model for multi die package, is multiple fork and
endfork statement allowed for one main branch? For example if the device
has 4 die and from each pad bondwires are connected to one external ball
is it okay to describe the path description as below?

Note the last fork-endfork statement. Is it necessary that the original
path needs to be continued and therefore the path description has to end
with a series path? 

[Path Description] QUAD_DIE_SIGNAL
A1
Len=0 R=16.646m L=1.406n C=0.456p /      |Substrate R, L and C 

Fork
Len=0 R=10m L=1nH C=1p /             |Bondwire r,l,c from pin A1 to U1,
pad #21
Endfork
Node U1.21

Fork
Len=0 R=10m L=1nH C=1p /             |Bondwire r,l,c from pin A1 to U2,
pad #21
Endfork
Node U2.21

Fork 				|Bondwire r,l,c from pin A1 to U3, pad
#21
Len=0 R=10m L=1nH C=1p 
Endfork 
Node U3.21

Fork 				|Bondwire r,l,c from pin A1 to U4 , pad
#21
Len=0 R=10m L=1nH C=1p 
Endfork 
Node U4.21

Best Regards
Moshiul Haque
Micron Technology Inc.

|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993