[IBIS-Users] Re: how to create the ibis of gigabit ethernet??

From: Andrew Ingraham <a.ingraham_at_.....>
Date: Thu Jan 05 2006 - 06:27:13 PST
I've not looked closely at gigabit ethernet, but older 100 Mb/s ethernet had 3 voltage levels (+, -, and 0).

I don't think IBIS can handle this sort of thing, since IBIS understands only two states: High and Low.

I'd stick with SPICE models for the ethernet drop side of the interface.

Regards,
Andy



|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993
Received on Thu Jan 5 06:27:30 2006

This archive was generated by hypermail 2.1.8 : Thu Jan 05 2006 - 06:30:57 PST