[IBIS-Users] How I can extract two value for vinh and vinl

From: Akhilesh CHANDRA <akhilesh.chandra_at_.....>
Date: Thu Feb 02 2006 - 02:23:43 PST
Hi,

     I have just one query. According to the IBIS specification we can 
support Vinh+, Vinh-, Vinl+ & Vinl-.

   I extract these valuse by applying one pulse at the input and find 
out the voltage at which it switch from 0->1 and 1->0. According to me I 
have only one value at one process, voltage temp. How I can extract two 
value for vinh and vinl for one process, voltage and temp.

Regards
Akhilesh

|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993
Received on Thu Feb 2 02:24:57 2006

This archive was generated by hypermail 2.1.8 : Thu Feb 02 2006 - 02:30:18 PST