RE: [IBIS-Users] issue in VT extraction

Arpad,



         This data for plot is generated using spice3



Best Regards

Kiran Kumar



________________________________

From: owner-ibis-users@eda.org [mailto:owner-ibis-users@eda.org] On
Behalf Of Muranyi, Arpad
Sent: Thursday, February 02, 2006 10:06 PM
To: ibis-users@eda.org; ibis@eda.org
Subject: RE: [IBIS-Users] issue in VT extraction



Kiran,



Which simulator did you use when

you made this waveform?



Arpad

================================



________________________________

From: owner-ibis-users@eda.org [mailto:owner-ibis-users@eda.org] On
Behalf Of seshadri.kirankumar@wipro.com
Sent: Thursday, February 02, 2006 3:19 AM
To: ibis-users@eda.org; ibis@eda.org
Subject: [IBIS-Users] issue in VT extraction

Hi IBIS Experts,



    I have an query  in IBIS modeling about extracting VT data,

I am generating model for one buffer which is having its output swing
from +0.21V to -0.21V, But as you see in the Plot for

Rising (if the i/p pulse is Rising ) then it is giving proper switching
(Red coloured)

But in Falling (if the i/p pulse is falling) then for  1 st pulse it is
not going down and reaching to -0.21V even I tried giving very low
frequency i/p signal(Green coloured).



Here my doubt is why IBIS takes first 1/4 th of Pulseperiod of i/p
signal, is there any reason in that?



 If there is no any constraint on this  as I am seeing the good
performance in second pulse onwards I can do  a X-axis shift (Time
shift) of the second Falling Pulse.



I wanted this clarification because I am not aware of internal
architecture which causing this problem in the netlist(input) which I am
using for generation.



Thanks in Advance



Best Regards

Kiran Kumar




The information contained in this electronic message and any attachments
to this message are intended for the exclusive use of the addressee(s)
and may contain proprietary, confidential or privileged information. If
you are not the intended recipient, you should not disseminate,
distribute or copy this e-mail. Please notify the sender immediately and
destroy all copies of this message and any attachments.

WARNING: Computer viruses can be transmitted via email. The recipient
should check this email and any attachments for the presence of viruses.
The company accepts no liability for any damage caused by any virus
transmitted by this email.

www.wipro.com






The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments.

WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email.

www.wipro.com
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda.org/pub/ibis/email_archive/  Recent
|  http://www.eda.org/pub/ibis/users_archive/  Recent
|  http://www.eda.org/pub/ibis/email/          E-mail since 1993