From: "lau yy" <tok47@hotmail.com>
To: ibis@eda.org
Subject: [IBIS] Pull Down data
Date: Tue, 07 Mar 2006 12:45:50 +0000
Hi ALL,I have some question regading the Pull Down datas.The data for my I/O pin start from 0 then decrease (become negative value), but suddenly the data turn to positive value (in mV). Anything wrong with these datas?And when I check these data by using ibischk3, I have the mismatch problem. Is this cause by the Pull Down datas? Is this a design problem or simulator problem?I do attach the IBIS model with this mail.Thanksrdgsyylau
|------------------------------------------------------------------ |For help or to subscribe/unsubscribe, email majordomo@eda.org |with just the appropriate command message(s) in the body: | | help | subscribe ibis <optional e-mail address, if different> | subscribe ibis-users <optional e-mail address, if different> | unsubscribe ibis <optional e-mail address, if different> | unsubscribe ibis-users <optional e-mail address, if different> | |or email a written request to ibis-request@eda.org. | |IBIS reflector archives exist under: | | http://www.eda.org/pub/ibis/email_archive/ Recent | http://www.eda.org/pub/ibis/users_archive/ Recent | http://www.eda.org/pub/ibis/email/ E-mail since 1993
This archive was generated by hypermail 2.1.8 : Tue Mar 07 2006 - 17:57:14 PST