RE: [IBIS-Users] Test case to see the sensitivity of split C_comp values

Hi Venu,

Basically you need a non-ideal power delivery model in order to see the
effects of split c_comp.  

I recommend that you use a fully coupled (and frequency dependent would be
even better) sig/pwr/gnd package+PCB model that has ports at the driver,
receiver, and power supply locations.

There has been a lot of exploration work regarding how to split c_comp over
the past 1.5 years.  Zhiping Yang has published a few documents about his
techniques - it's a good place to start if you haven't seen them yet.  
I believe this was his latest paper:
http://www.vhdl.org/pub/ibis/summits/dec05/yang.pdf

Just let me know if you have any other questions.

Thanks,
Sam


-----Original Message-----
From: owner-ibis-users@server.eda-stds.org
[mailto:owner-ibis-users@server.eda-stds.org] On Behalf Of Ummalaneni, Venu
Babu (Venu)
Sent: Monday, July 17, 2006 4:23 AM
To: ibis-users@server.eda-stds.org
Subject: [IBIS-Users] Test case to see the sensitivity of split C_comp
values

Hi Gurus,

Could some one suggest me a test case which can be useful for observing
the sensitivity of split C_comp values of IBIS?

Need for the test case: I am extracting the split C_comp values of the
IO buffer from two different approaches. I need to select one of the
approach by correlating with hspice model. For that, I need a test case
that is very sensitive to split C_comp values. 

Thanks in advance.

Best Regards,
Venu


sensitivity

--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993

--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993