Re: [IBIS-Users] ibschk- warnings

Hello Sujit,

The non-monotonicity is usually only when noise exceeds delta, like in 
the following lines:
   0.000S          0.2264uV            6.1660uV           52.1239nV
   81.6327pS       0.2356uV            6.1723uV           68.1925nV
    0.1633nS       0.2409uV            6.1693uV            0.4050uV
Nothing to worry about when your voltage/current is anyway close to zero.

The waveform warnings could be caused by either short simulation time 
and/or selection of load. You can read more about both issues here:
http://www.ece.ncsu.edu/erl/ibis/faq/S2IBIS3_FAQ.htm#_A1


Best regards,  Lars Snith


Sujit Kumar-r65837 wrote:
> hi ibis experts
> ibschk run on an ibis generates following warnings:
> Errors  : 0
> Warnings: 10
> 
> File Passed*
> 
> i have following queries:
>  >  what could be the possible reason for such warnings ?
>  >  as  file is passing throgh ibschk, so can i neglect the above warnings ?
> 
> pls suggest.
> .s2i and ibs file are attached for reference.

-- 
Those who can, Do
Those who can't, Simulate

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993