[IBIS-Users] Why is it necessary to take R_load/R_fixture, rather than taking only Capacitor(C_load) for V-T tables?

From: bhavneet aujla <bhavneetsingh1_at_.....>
Date: Wed Feb 14 2007 - 08:54:32 PST
Hello,
  For the realisation of V-T table/Ramp [Rising Waveforms and Falling Waveforms] at the output we require a Resistance [R_fixture/ R_load], but in CMOS, Capacitor acts as load so why it is'nt neccessary to take Capacitor at output for extraction of V-T. Since i know R-fixture specifies the impedance of the system transmission lines the buffer will drive, but still confused that, for CMOS load is capacitor, and finally output via transmission line has to drive CMOS (which is modeled as capacitor).
  Regards
Bhavneet Singh
  Sub: Why is it necessary to take R_load/R_fixture, rather than taking only Capacitor(C_load) for V-T tables?

 
---------------------------------
Bored stiff? Loosen up...
Download and play hundreds of games for free on Yahoo! Games.
-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.


--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993
Received on Wed Feb 14 08:56:22 2007

This archive was generated by hypermail 2.1.8 : Wed Feb 14 2007 - 08:56:52 PST