RE: [IBIS-Users] any EDA tool can support .pkg ibis model?

Eric,

 

My apologies for the delay in reply.

 

SiSoft's tool (Quantum-SI) supports the IBIS [Package Model] syntax.

 

Todd.

 

Todd Westerhoff

VP, Software Products

SiSoft

6 Clock Tower Place, Suite 250

Maynard, MA  01754

(978) 461-0449 x24

twesterh@sisoft.com

www.sisoft.com

  _____  

From: owner-ibis-users@eda.org [mailto:owner-ibis-users@eda.org] On Behalf
Of Eric Hsu
Sent: Thursday, March 22, 2007 10:16 PM
To: ibis-users@eda.org; ibis-users@eda.org
Subject: [IBIS-Users] any EDA tool can support .pkg ibis model?

 

Hi IBIS expert,

 

Is there any EDA tool can really simulate 3.2 version ibis model with
package model (*.pkg)? Right now, I can not use Hyperlynx 7.2 to run
simulation for it. The following format is an example:

 

[IBIS Ver]              3.2

[Comment Char]          |_char

[File Name]             abc.pkg

[File Rev]              1.0

[Date]                  March 22, 2007

[Source]                abc Corporation's result.

[Notes]            a

[Disclaimer]        a

[Copyright]          a

|

| insert package model from here to ibis

[Define Package Model]  abc

[Manufacturer]        a  

[OEM]                  a 

[Description]           a

|

[Number Of Pins]        1

|

[Pin Numbers]

a1 len=0 L=1n /

len=1.1 L=0.1n R=0.1 C=1p /

len=0 L=1n R=0.1 C=1p /

len=1.1 L=0.1n R=0.1 C=1p /

len=0 L=1n R=0.1 C=1p /

|

[End Package Model]

| end insertion

[End]

 

Because I am not sure whether EDA tool does support "stub" (red highlight)
portion, if any one can provide your experience, I will very appreciate!

 

Regards,

 

Eric

 

 


-- 
This message has been scanned for viruses and 
dangerous content by  <http://www.mailscanner.info/> MailScanner, and is 
believed to be clean. 

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.



--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993