[IBIS-Users] [IBIS]: Value of USE_NA and NOT_USED

From: Shrikant G Kadadevar <Shrikant.G.Kadadevar_at_.....>
Date: Tue Jan 29 2008 - 03:29:15 PST
Hi All

I was curious to know why the values used in the S2IBIS3 source code for 
USE_NA and NOT_USED are as shown below.

*USE_NA            =   -1.33287736222333E20;
NOT_USED      =   -1.33287736222333E18;*

Is there any purpose or just is it fine to use any other values.

Thanking you
Shrikant GK


-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993
Received on Tue Jan 29 03:33:09 2008

This archive was generated by hypermail 2.1.8 : Tue Jan 29 2008 - 03:34:00 PST