RE: [IBIS-Users] {Spam?} Questions

From: Tom Dagostino <tom_at_.....>
Date: Thu Feb 14 2008 - 09:51:11 PST
1.       A series of model selectors, one for each pin or group of pins that
could have different Vdd supplies, is the way to go.

2.       What simulator and version does your customer have?  It may be that
no matter what version model you make the customer may not have the  tools
to use it.

 

 

 

Tom Dagostino
Teraspeed(R) Labs
13610 SW Harness Lane
Beaverton, OR 97008
503-430-1065

503-430-1285 FAX
tom@teraspeed.com
www.teraspeed.com

Teraspeed Consulting Group LLC
121 North River Drive
Narragansett, RI 02882
401-284-1827 

 

From: owner-ibis-users@server.eda.org
[mailto:owner-ibis-users@server.eda.org] On Behalf Of Chetana Raghuwanshi
Sent: Thursday, February 14, 2008 3:38 AM
To: ibis-users@server.eda.org; ibis@server.eda.org
Subject: [IBIS-Users] {Spam?} Questions

 

Hello Experts,

I have two questions on IBIS. 

1. My IO cell can operate at two different voltages 3.3 and also at 1.8. We
deliver two separate IBIS files for these two operating voltages. 

For this cell, our customer needs to use different voltages at same time,
that is, some pins are using 3.3 V and some are using 1.8 V. 

Is it possible to mix these two files into one .ibs file ? 

2. The IBIS version of library delivered by us is 2.0. Is it possible for
the customer to use it in a package model whose IBIS version 4.0. ? 

Thanks in Advance, 

Best Regards 

Chetana 

 





-- 
This message has been scanned for viruses and 
dangerous content by  <http://www.mailscanner.info/> MailScanner, and is 
believed to be clean. 


-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.




--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993
image002.png
Received on Thu Feb 14 09:58:32 2008

This archive was generated by hypermail 2.1.8 : Thu Feb 14 2008 - 09:59:48 PST