[IBIS-Users] pwr/gnd clamp voltage range -vdd to 2vdd;

From: Nekkondi, Hima <bindu_at_.....>
Date: Wed Jun 25 2008 - 22:38:39 PDT
Hi Experts,

 

 I wanted to create the voltage range for PWR/GND CLAMP from -VDD to
+2VDD ,

 but the tool generated voltage range is -Vcc to Vcc(GND_Clamp) & -Vcc
to 0(PWR_Clamp). 

Can any one let me know how can i get the voltage range (-VDD to +2VDD).

 

 

Regrads,

Hima.


-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.


--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993
Received on Wed Jun 25 22:37:47 2008

This archive was generated by hypermail 2.1.8 : Wed Jun 25 2008 - 22:38:53 PDT