Re: [IBIS-Users] Differential Driver IBIS Modelling

From: Vaibhav Agarwal <vaibhav_at_.....>
Date: Thu Aug 07 2008 - 03:46:20 PDT
Hello all,

I am remailing this query as the previous message might have bounced.

Please refer some documents relating to my query of
IBIS modelling of a differential buffer.

Regards,
Vaibhav

------Query  earlier mailed

>   Hello ibis experts,
>
>>
>> I am into the IBIS modelling of a differential buffer.
>>
>> Some of the models available on web are simply using [Diff Pin].
>> while some of the differential drivers use [Series Pin Mapping] with 
>> any Series [Model].
>>
>> Can you please explain that a series model is required or not and if 
>> required
>> on what basis it is chosen (RSeries or CSeries or Series Mosfet or 
>> Series Current, which one to take).
>>
>> I went through some pdf's but I am looking for more elaborate 
>> explanation of this topic. PLease help.
>>
>> Regards,
>> Vaibhav
>


-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993
Received on Wed Aug 6 22:25:09 2008

This archive was generated by hypermail 2.1.8 : Wed Aug 06 2008 - 22:26:04 PDT