[IBIS-Users] Rising falling waveform timestep

Hello All,

I had a question regarding the timesteps for the rising/falling 
waveform. Is it legal to use unequal timestep for the rising or falling 
waveforms? I did not read anywhere in the IBIS spec that prevents me 
from doing so. Even Hyperlynx is able to read the IBIS file with unequal 
timestep and does not give any warnings/errors.

I just wanted to confirm if there is anything that prevents me from 
using unequal timesteps in rising/falling waveform. Any help would be 
greatly appreciated.

Thanks,

Anshul

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993