[IBIS-Users] Re: IBIS Reflector Message - Re-send

From: Prasanna R <prasanna_at_.....>
Date: Wed Dec 17 2008 - 19:55:16 PST
Hi All,

    Can anyone please let me know how to find if On-Die Termination(ODT) / On-Chip Termination(OCT) option is available in the 
 given IBIS file ?

   PS: Thanks Bob! for helping towards my subscription on IBIS forum.

Thanks and Regards
Prasanna R
Si2 Microsystems P Ltd, Bangalore|Ph: 080-67171108.

----- Original Message ----- 
From: "Bob Ross" <bob@teraspeed.com>
To: <prasanna@si2micro.com>
Cc: <bob@teraspeed.com>
Sent: Thursday, December 18, 2008 3:02 AM
Subject: IBIS Reflector Message - Re-send


> Hi
> 
> Your message below did not go out on the IBIS Reflectors because
> it needs to be sent from an address from which you are subscribed.
> 
> I have subscribed you to the above address.
> 
> You can now re-send the message on the IBIS Users Reflector
> 
> What does OCT stand for?
> 
> Best Regards,
> Bob
> 
> 
> ----------------------------------------------
> Hi All,
> 
> Can anyone please let me know how to find if ODT/OCT option is available in the 
> given IBIS file ?
> 
> Thanks and Regards
> Prasanna R
> Si2 Microsystems P Ltd, Bangalore|Ph: 080-67171108.
> --=20
> This message has been scanned for viruses and
> dangerous content by MailScanner, and is
> believed to be clean.
> 
> -----------------------------------------------
> -- 
> Bob Ross
> Teraspeed Consulting Group LLC     Teraspeed Labs
> 121 North River Drive              13610 SW Harness Lane
> Narragansett, RI 02882             Beaverton, OR 97008
> 401-284-1827                       503-430-1065
> http://www.teraspeed.com           503-246-8048 Direct
> bob@teraspeed.com
> 
> Teraspeed is a registered service mark of Teraspeed Consulting Group LLC
> 
>
-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.




--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993
Received on Wed Dec 17 19:58:39 2008

This archive was generated by hypermail 2.1.8 : Wed Dec 17 2008 - 19:59:33 PST