[IBIS-Users] Ccomp extraction via Tank method

Hello All,

For Ccomp extraction I have so far relied on Time Domain methods. But as 
shown in the documentation (link below) the result is not always 
reliable.   http://www.eda.org/ibis/summits/jun02/hegazy.pdf

I have put together a simple testbench to play around with the Tank 
method, and true enough values are not especially sensible to any of 
supply, temperature or even process variations.

However, before I embark on wrapping up a new flow for myself I thought 
I'd just ask this forum if there is already a recommended testbench for 
the Tank method out there? If so, I'd be most interested to share.


Best regards,  Lars
-- 
Those who can, Do
Those who can't, Simulate

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993