[IBIS-Users] Usage of [Series Current]

From: Edward Rose <rose4edward_at_.....>
Date: Mon Sep 14 2009 - 03:26:44 PDT
Hello Experts,

I am trying to use [Series Current] keyword instead of [R series] in a
Series model as given below.


|**********************************************************************
[Model]  SER_RES
Model_type  Series
Polarity  Non-Inverting
Enable  Active-High
C_comp  0pF  0pF  0pF
|
|  typ  min  max
[Voltage Range] 1.2V 1.08V 1.32V
|
| variable R(typ) R(min) R(max)
|
|[R Series] 100ohm  NA  NA
|
[End]
|**********************************************************************
|
[Model]  SER_CURR
Model_type  Series
Polarity  Non-Inverting
|Enable  Active-High
C_comp  0pF  0pF  0pF
|
|  typ  min  max
[Voltage Range] 1.2V 1.08V 1.32V
|
[Series Current]
| Voltage I(typ)    I(min)    I(max)
   0.00V   0.0A      NA  NA
   0.10V  -1.0mA   NA  NA
   0.20V  -2.0mA   NA  NA
   0.30V  -3.0mA   NA  NA
   0.40V  -4.0mA   NA  NA
   0.50V  -5.0mA   NA  NA
   0.60V  -6.0mA   NA  NA
   0.70V  -7.0mA   NA  NA
   0.80V  -8.0mA   NA  NA
   0.90V  -9.0mA   NA  NA
   1.00V  -10.0mA  NA  NA
   1.10V  -11.0mA  NA  NA
   1.20V  -12.0mA  NA  NA
|
[End]
|*****************************************************

According to understanding from IBIS specification document,  both above
given models should be identical.
But, during simulation I am getting different results.
Series model with only [R series] is giving desirable result while model
with only [Series current] giving totally different results

Am I doing something wrong or there is some problem with my simulator???

Thanks in advance
Edward

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.


--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993
Received on Mon Sep 14 03:28:19 2009

This archive was generated by hypermail 2.1.8 : Mon Sep 14 2009 - 03:29:47 PDT