[IBIS-Users] question about IBIS simulation for a complete inverter

Dear Sir/Madam,
As a beginner worked with IBIS model, I met a problem about the
IBIS simulation for a complete device. Let's take an inverter as an example.
If I want to model a complete inverter including the transfer function by
using IBIS, do I just need to simulate the output model only(i.e. does the
output model contain the transfer function) ? or cascade IBIS input model
with output model?
If we need to cascade them, does that mean just to receive the output signal
of the input model as the input signal of the output model?

Thanks and regards,
Ji Yuancheng

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993