RE: [IBIS-Users] mutual inductance in EBD files

Amin,

Looks like the answer is NO. Even though the EBD syntax is

almost identical to the package syntax for the multi-segment

uncoupled T-line style trace descriptions, the lumped RLC

coupled matrix syntax of package models is not available

for EBD models.

Thanks,

Arpad

==============================================================

From: owner-ibis-users@eda.org [mailto:owner-ibis-users@eda.org] On
Behalf Of Maher, Amin
Sent: Wednesday, June 08, 2011 5:36 AM
To: ibis-users@eda.org
Subject: [IBIS-Users] mutual inductance in EBD files

Hello experts,

Is there a way to describe mutual inductance (coupling) between EBD
paths.

Regards,

Amin Maher

-- 
This message has been scanned for viruses and 
dangerous content by MailScanner <http://www.mailscanner.info/> , and is
believed to be clean. 
-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993