RE: [IBIS-Users] A question about the ibis simulation.

From: Muranyi, Arpad <Arpad_Muranyi@mentor.com>
Date: Wed Jul 06 2011 - 06:46:04 PDT

The reason for the spice is most likely
the capacitance in the receiver.

Arpad
========================================

From: Zhanggezi [mailto:gezi.zhang@huawei.com]
Sent: Wednesday, July 06, 2011 5:35 AM
To: Muranyi, Arpad; 'ibis-users'
Cc: 'yang@huawei.com'
Subject: 答复: [IBIS-Users] A question about the ibis simulation.

Hi All,

The topology is below. And ibis file is very large, I will share with you if needed after deleting unnecessary information.
[cid:image002.png@01CC3BB9.215244D0]

And the probe is on the receiver, three simulation outputs are different corners for one model(fast,typical and slow corners), and I
Want to the reason for the spike. Any one can help?
[cid:image003.jpg@01CC3BB9.215244D0]

发件人: owner-ibis-users@eda.org [mailto:owner-ibis-users@eda.org] 代表 Muranyi, Arpad
发送时间: 2011年7月5日 23:52
收件人: 'ibis-users'
主题: RE: [IBIS-Users] A question about the ibis simulation.

Naftali,

I am not sure I understand what the “The topology is one on one” is
referring to in the original question. So I am not sure what
you mean by “set a very same length to both T branches” either. Please
clarify your question.

Thanks,

Arpad
==============================================================

From: naftali refaeli [mailto:Naftali.Refaeli@ecitele.com]
Sent: Tuesday, July 05, 2011 10:49 AM
To: Muranyi, Arpad; 'ibis-users'
Subject: RE: [IBIS-Users] A question about the ibis simulation.

Do you mean that If he will set a very same length to both T branches – then the phenomenon will disappear?


Naftali Refaeli
CAE Engineer
ITO
HP Enterprise Services
Telephone +972 3.9266973
Mobile +972 52.3542043
Email Naftali.Refaeli@ecitele.com<mailto:Naftali.Refaeli@ecitele.com>

From: owner-ibis-users@eda.org [mailto:owner-ibis-users@eda.org] On Behalf Of Muranyi, Arpad
Sent: Tuesday, July 05, 2011 6:45 PM
To: 'ibis-users'
Subject: RE: [IBIS-Users] A question about the ibis simulation.

Grace,

It looks like that the first ledge is the voltage that the
driver can drive with the load imposed on it by the T-line.
Once the reflection comes back to the driver the voltage
steps up to the full swing levels. This is basic T-line
theory.

Arpad
============================================================

From: owner-ibis-users@eda.org [mailto:owner-ibis-users@eda.org] On Behalf Of Zhanggezi
Sent: Monday, July 04, 2011 8:54 PM
To: 'ibis-users'
Subject: [IBIS-Users] A question about the ibis simulation.




Hi All,



  The topology is one on one. The simulation result is below. I am curious about the simulation circled



by red pink. What’s the cause? Could someone give me any hint?



  [cid:image004.png@01CC3BB9.215244D0]



Thank you.



Grace

--
This message has been scanned for viruses and
dangerous content by MailScanner<http://www.mailscanner.info/>, and is
believed to be clean.

--
This message has been scanned for viruses and
dangerous content by MailScanner<http://www.mailscanner.info/>, and is
believed to be clean.

This e-mail message is intended for the recipient only and contains information which is CONFIDENTIAL and which may be proprietary to ECI Telecom. If you have received this transmission in error, please inform us by e-mail, phone or fax, and then delete the original and all copies thereof.

--
This message has been scanned for viruses and
dangerous content by MailScanner<http://www.mailscanner.info/>, and is
believed to be clean.

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.



--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda-stds.org/pub/ibis/email_archive/ Recent
| http://www.eda-stds.org/pub/ibis/users_archive/ Recent
| http://www.eda-stds.org/pub/ibis/email/ E-mail since 1993

image002.png
image003.jpg
image004.png
Received on Wed Jul 6 06:46:38 2011

This archive was generated by hypermail 2.1.8 : Wed Jul 06 2011 - 06:47:11 PDT