[IBIS-Users] IBIS Delay Model

From: Nagarjuna Vallamkonda <Nagarjuna.Vallamkonda@synopsys.com>
Date: Tue Sep 20 2011 - 22:22:53 PDT

Hi

As we know that, rm_dly_* keywords are used to remove the initial and flat tail delay for rising and falling waveforms in HSPICE. Does these keywords have any impact on rising and falling times of waveforms?

When we compare the results of HSPICE with Mentor ICX Pro explorer, I see different results for the two tools. Why is it happening so for such a simple circuit?

Can anyone help me regarding this ASAP.

Thanks & Regards
Nagarjuna

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail majordomo@eda-stds.org
|with the appropriate command message(s) in the body:
|
|  help
|  subscribe   ibis       <optional e-mail address, if different>
|  subscribe   ibis-users <optional e-mail address, if different>
|  unsubscribe ibis       <optional e-mail address, if different>
|  unsubscribe ibis-users <optional e-mail address, if different>
|
|or e-mail a request to ibis-request@eda-stds.org.
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/pub/ibis/email_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/users_archive/ Recent
|  http://www.eda-stds.org/pub/ibis/email/         E-mail since 1993
Received on Tue Sep 20 22:23:27 2011

This archive was generated by hypermail 2.1.8 : Tue Sep 20 2011 - 22:24:00 PDT