[IBIS-Users] RE: Clarification on [Series Pin Mapping] and [Model Selector]

Rene,

According to the keyword hierarchy on pg. 8 of the
v5.1 specification, [Series Pin Mapping] is under the
[Component] keyword, but [Model Selector] is not.
[Model Selector] is on the same hierarchy level as
[Component].

I hope this helps,

Arpad
======================================================

From: owner-ibis-users@eda.org [mailto:owner-ibis-users@eda.org] On Behalf Of Rene Voshol
Sent: Monday, September 16, 2013 3:29 AM
To: ibis-users@eda.org
Subject: [IBIS-Users] Clarification on [Series Pin Mapping] and [Model Selector]

Hi,

I have been making IBIS models for some time now. When devices are available in multiple packages I include these as different components. Up till now I included the [Series Pin Mapping][ and the [Model Selector] sections only once since they apply to all components. But after re-reading the IBIS specification I came to the conclusion that these sections should actually be included in each [Component]. The questions I have now:


1.    Did I read the specification correct?

2.    The simulator I use seems to work fine with only one [Model Selector] section. Do different simulators treat this differently? In other words, do I run the risk that models that work fine with me, do not run correctly with customers?

Kind Regards,

René Voshol



--
This message has been scanned for viruses and
dangerous content by MailScanner<http://www.mailscanner.info/>, and is
believed to be clean.

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.


--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail mikelabonte@eda-stds.org
|or ibis-request@eda-stds.org
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/ibis/email_archive/ Recent
|  http://www.eda-stds.org/ibis/users_archive/ Recent
|  http://www.eda-stds.org/ibis/email/         E-mail since 1993