[IBIS-Users] RE: Regarding IBIS Model

From: Mirmak, Michael <michael.mirmak@intel.com>
Date: Thu Dec 19 2013 - 21:45:36 PST
After checking using the parser, of course.  J



Michael Mirmak

Intel Corp.

Chair, IBIS Open Forum





From: owner-ibis-users@eda.org [mailto:owner-ibis-users@eda.org] On Behalf Of Muranyi, Arpad
Sent: Thursday, December 19, 2013 12:34 PM
To: ibis-users@eda.org
Subject: [IBIS-Users] RE: Regarding IBIS Model



Sandeep,



As far as I know, the only way you can check

whether an IBIS model is working or not is by

putting a test circuit together in your favorite

EDA tool and run a few test simulations.



Thanks,



Arpad

=================================================



From: owner-ibis-users@eda.org<mailto:owner-ibis-users@eda.org> [mailto:owner-ibis-users@eda.org] On Behalf Of Sandeep Kumar(Sandeep Kumar)/Engineer I (??)/MSI.Engineering/(?)??
Sent: Thursday, December 12, 2013 9:37 PM
To: ibis-users@eda.org<mailto:ibis-users@eda.org>
Subject: [IBIS-Users] Regarding IBIS Model



Hi ,



I want to know is there any method to know to check whether IBIS model is working or  not except

manual Verification.



Thanks & Regards

Sandeep Kumar




--
This message has been scanned for viruses and
dangerous content by MailScanner<http://www.mailscanner.info/>, and is
believed to be clean.


--
This message has been scanned for viruses and
dangerous content by MailScanner<http://www.mailscanner.info/>, and is
believed to be clean.


-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.


--------------------------------------------------------------------
|For help or to subscribe/unsubscribe, e-mail mikelabonte@eda-stds.org
|or ibis-request@eda-stds.org
|
|IBIS reflector archives exist under:
|
|  http://www.eda-stds.org/ibis/email_archive/ Recent
|  http://www.eda-stds.org/ibis/users_archive/ Recent
|  http://www.eda-stds.org/ibis/email/         E-mail since 1993
Received on Thu Dec 19 21:45:55 2013

This archive was generated by hypermail 2.1.8 : Thu Dec 19 2013 - 21:46:25 PST