******************************************************************************
********************* IBIS GOLDEN PARSER BUG REPORT FORM *********************
******************************************************************************
INSTRUCTIONS
To report a bug in the IBIS golden parser.  Please fill out the top part
of the following form and send the complete form to ibischk-bug@vhdl.org.
A list of reported bugs will be maintained on vhdl.org.
******************************************************************************
PARSER VERSION NUMBER:
   Found in IBISCHK3 V3.2.8 built for Windows 95
PLATFORM (SPARC, HP700, PC, etc.):
   PC
OS AND VERSION:
   Windows 2000 (Build 2195: Service Pack 2)
REPORTED BY: Matthew Flora, Innoveda, Inc.
DATE: 23 Apr 2002
DESCRIPTION OF BUG:
   The parser generates an error if a path within an EBD file includes an
   external pin that has been declared as a power supply pin.
   On the example file below the following error is reported:
   "ERROR - Pin '2' was referenced on Electrical Paths but is implicitly
    connected to a power or gnd plane."
INSERT IBIS FILE DEMONSTRATING THE BUG:
   [IBIS ver]       3.0
   [File name]      demo.ebd
   [File Rev]       0.0
   [Date]           Apr. 23, 2002
   [Source]
   [Notes]
   [Disclaimer]
   [Copyright]
   |
   [Begin Board Description]  demo_U20
   [Manufacturer]             Unknown
   |
   [Number Of Pins]  
   
   [Pin List]  signal_name
   1         xin
   2         POWER
   [Path Description] xin
   Pin 1
   Len=0 R=0.04848 /
   Pin 2
   [Reference Designator Map]
   | Ref Des  File name   Component name
   [End Board Description]
   [End]
******************************************************************************
******************** BELOW FOR ADMINISTRATION AND TRACKING *******************
******************************************************************************
BUG NUMBER: 69
SEVERITY: [FATAL, SEVERE, MODERATE, ANNOYING, ENHANCEMENT]  MODERATE
PRIORITY: [HIGH, MEDIUM, LOW]                               LOW
STATUS: [OPEN, CLOSED, WILL NOT FIX, NOT A BUG]             CLOSED
FIXED VERSION: 4.0 (beta)
FIXED DATE:    July 15, 2003
NOTES ON BUG FIX:
  Classified at the May 10, 2002 meeting.  Will change Error to Warning
  in case some EDA tools have problems with this configuration.
  Also fixed in Version 3 files tested by ibischk4.
******************************************************************************
******************************************************************************