****************************************************************************** ********************* IBIS GOLDEN PARSER BUG REPORT FORM ********************* ****************************************************************************** INSTRUCTIONS To report a bug in the IBIS golden parser. Please fill out the top part of the following form and send the complete form to ibischk-bug@eda.org. A list of reported bugs will be maintained on vhdl.org. ****************************************************************************** PARSER VERSION NUMBER: PLATFORM (SPARC, HP700, PC, etc.): All OS AND VERSION: All REPORTED BY: Lance Wang, Cadence Design Systems Inc. DATE: 10/29/2002 DESCRIPTION OF BUG: In [Pin] Section, under model_name column, illegal type of model is used in the test case. IBISCHK3.2.9 is not reporting any error on it. It can be reported if this model contains [Series Pin Mapping] section and pin 1 specified there. Here is the log: IBISCHK3 V3.2.9 Checking bug77.ibs for IBIS 3.2 Compatibility... ERROR - Component 'TestMosfet2': [Series Pin Mapping] Pin1 '1': model type cannot be Series or Series_switch. ERROR - Component 'TestMosfet2': [Series Pin Mapping] Pin2 '2': model type cannot be Series or Series_switch. Errors : 2 File Failed Note: The same ERROR message for TestMosfet1, Pin 1 is needed. INSERT IBIS FILE DEMONSTRATING THE BUG: |* Test Revised 11/2/2002 by Bob Ross [IBIS Ver] 3.2 [File Name] bug77.ibs [File Rev] 1.0 [Date] 7/16/2002 [Source] Based on nothing [Notes] To be used for testing [Disclaimer] Model does not represent any actual part from any vendor. | |**************************************************************** | [Component] TestMosfet1 [Manufacturer] Nobody | [Package] R_pkg 284m NA NA L_pkg 7.89nH NA NA C_pkg 1.35pF NA NA | [Pin] signal_name model_name R_pin L_pin C_pin 1 mos1 mosfet1 NA NA NA | |*********************************************************** | [Model] mosfet1 Model_type Series_switch C_comp 2p 2p 2p [Voltage Range] 3.3 3.3 3.3 [Temperature Range] 25 125 0 | [On] [Series MOSFET] Vds = 0.5 | Voltage I(typ) I(min) I(max) 0.0 48.6ma NA NA 3.3 68.2ma NA NA | [Off] [Series Current] | Voltage I(typ) I(min) I(max) 0.0 0ma NA NA 3.3 0ma NA NA | [Component] TestMosfet2 [Manufacturer] Nobody | [Package] R_pkg 284m NA NA L_pkg 7.89nH NA NA C_pkg 1.35pF NA NA | [Pin] signal_name model_name R_pin L_pin C_pin 1 mos1 mosfet2 NA NA NA 2 mos1 mosfet2 NA NA NA | [Series Pin Mapping] pin_2 model_name function_table_group 1 2 mosfet2 1 [Series Switch Groups] On 1 / | |*********************************************************** | [Model] mosfet2 Model_type Series_switch C_comp 2p 2p 2p [Voltage Range] 3.3 3.3 3.3 [Temperature Range] 25 125 0 | [On] [Series MOSFET] Vds = 0.5 | Voltage I(typ) I(min) I(max) 0.0 48.6ma NA NA 3.3 68.2ma NA NA | [Off] [Series Current] | Voltage I(typ) I(min) I(max) 0.0 0ma NA NA 3.3 0ma NA NA | [End] ****************************************************************************** ******************** BELOW FOR ADMINISTRATION AND TRACKING ******************* ****************************************************************************** BUG NUMBER: 77 SEVERITY: [FATAL, SEVERE, MODERATE, ANNOYING, ENHANCEMENT] MODERATE PRIORITY: [HIGH, MEDIUM, LOW] MEDIUM STATUS: [OPEN, CLOSED, WILL NOT FIX, NOT A BUG] CLOSED FIXED VERSION: 4.0 (beta) FIXED DATE: July 15, 2003 NOTES ON BUG FIX: Classified at the December 13, 2002 IBIS Meeting To be fixed at the next release. Also fixed in Version 3 file tested by ibischk4 ****************************************************************************** ******************************************************************************