Re: Pin Name

Arthur,

POWER,GND,gnd,power are reserved keywords and cannot be used.

If you name it 'gnd1' it's ok but not 'gnd'.

Regards,
Syed.
National Semiconductor Corp.
> From owner-ibis@vhdl.vhdl.org Thu Dec 5 12:22:00 1996
> From: Arthur Wong <Arthur.Wong@idt.com>
> Date: Thu, 5 Dec 1996 12:13:04 -0800
> To: ibis-users@vhdl.org
> Subject: Pin Name
> Content-Length: 481
>
>
> To IBIS users,
>
> I have a 2.1 IBIS model in which I specified under [Pin]
> the pin name "gnd". When I ran the golden parser
> (ibis_chk, v2.1.11), I got this error message:
>
> ERROR (line 34) - Illegal use of Reserved Word 'gnd'.
>
>
> The spec only requires pin names be 5 char max. Am I
> missing something? Here's the complete line:
>
> [Pin] signal_name model_name R_pin L_pin C_pin
> gnd gnd GND
>
> Regards,
> Arthur Wong
> IDT
> arthur@idt.com
>
Received on Thu Dec 5 12:41:07 1996