Question on Ramp

Hello Milan:

   Well....the first thing that poped into my mind was: double check that
you are supplying a stimulas waveform to the input (i.e. telling the output
buffer to switch). You might also check the state of any control inputs
on the buffer and make sure that that buffer is not in 3-state mode or
otherwise disabled. I hope this helps.

              Regards,
              Stephen Peters
              Intel Corp.

Hi,
        This is our first experience with IBIS, so this might
        be a trivial issue for you experienced folks !!

        We are getting Ramp (dV/dt) as 0 in ibis inspite of
        providing required Voltage values.
        What should we be looking for in order to get
        correct Ramp values in Ibis model.
        We are using tools from NC university.

-Thanks, Milan
 
Received on Mon Jun 16 17:06:37 1997