Re: Imp

Hello,

First of all you are using a version of the translator that is known to
have certain bugs. This is obvious if you look at the table. This particular
version only shows two digits after the decimel and also does not format
the data properly.
(See data below)

Download the s2ibis2_fix.tar.Z version from the website:

http://www.eda.org/pub/ibis/s2ibis/s2ibis2_v1.1/

Your .s2i file may also not be set right pointing to the right spice nodes.
This could result in bad pullup and pulldown tables.

Regards,
Syed
Cisco Systems,Inc

> From bharat_sinha@hotmail.com Wed Nov 18 15:08:10 1998
> X-SMAP-Received-From: outside
> X-Originating-IP: [147.145.40.40]
> From: "bharat sinha" <bharat_sinha@hotmail.com>
> To: shuq@cisco.com
> Cc: ibis@vhdl.org
> Subject: Imp
> MIME-Version: 1.0
> Date: Wed, 18 Nov 1998 15:06:14 PST
>
>
> Hi,
> This is just one of the sample files. Could you please spare a few
> minutes and see it thru S2IPLT. See how weird the waveforms are.
> This is a cell about which I had mailed warnings etc. yeterday.
> This problem is there with at least 1000 more cells!
> .please help me out.
> Thanx
> Bharat

> >> 4.20 -0.41A -0.57A -0.27A
> >> 4.40 -0.51A -0.66A -0.37A
> >> 4.60 -0.61A -0.76A -0.47A
> >> 4.80 -0.71A -0.87A -0.57A
> >> 5.00 -0.81A -0.97A -0.67A
> >>-133287736222332993536.00 0.00 1.00e 0.00
> >>-133287736222332993536.00 0.00 1.00e 0.00
> >>-133287736222332993536.00 0.00 1.00e 0.00
> >> 5.00 -0.81A -0.97A -0.67A
> >>|
Received on Wed Nov 18 15:28:34 1998