Re: Your Message Sent on Mon, 23 Nov 1998 15:50:29 PST

Hi,

Power Clamp is swept from Vdd to 2Vdd but note that the data is offset by
Vdd using this formula -> Vtable=Vdd-Vmeasured.

That means:
0V = 2.5 - 2.5 (Vmeas = 2.5V)
-2.5V = 2.5 - 5.0 (Vmeas = 2*Vdd)

So the sweep range is correct.
Regards,
Syed.
Cisco Systems, Inc
 
> shaggy_gonzalez writes:
>
> 1.Problem is that though the Gnnd Clamp is showing values from-2.5V to
> 2.5V, the Power Clamp is showing from -2.5V to 0V only.Is it O.K.?
>
Received on Mon Nov 23 16:31:08 1998