Re: [Add Submodel]

Scott:

You are correct.

Bob Ross
Mentor Graphics

Scott McMorrow wrote:
>
> All,
>
> I wanted to clarify and (possibly) confirm my understanding
> of Dynamic clamp submodels.
>
> My understanding is that the following submodel call will
> activate the static Power Clamp only when the model is not a
> driver (i.e. Input or 3-state mode). When the driver is active
> the Power clamp will not be activated.
>
> Am I correct?
>
> [Add Submodel]
> Bleem Non-Driving
> ...
> ...
>
> [Submodel] Bleem
> Submodel_type Dynamic_clamp
> |
> [POWER Clamp]
> | voltage I(typ) I(min) I(max)
> |
> power clamp curves removed for conciseness.
>
> regards,
>
> scott
> --
> Scott McMorrow
> Principal Engineer
> SiQual, Signal Quality Engineering
> 18735 SW Boones Ferry Road
> Tualatin, OR 97062-3090
> (503) 885-1231
> http://www.siqual.com
Received on Wed Jul 19 14:30:58 2000