RE: 74ALVCH16501 Ibis Model

You are right that there should be subtle differences, but
when push comes to shove, they will be crosses to one
another when the product hits mfg, so from a simulation
standpoint, your simulations should still achieve the
desired results with this model.

MG
> -----Original Message-----
> From: Hassan Ali [SMTP:hali@nortelnetworks.com]
> Sent: Monday, June 19, 2000 1:52 PM
> To: ibis users
> Subject: RE: 74ALVCH16501 Ibis Model
>
> Would the model of the device made by Philips fit similar device (same
> logic family) made by TI? I always thought that there are subtle
> differences? Am I right?
>
> Hassan.
>
>
> -----Original Message-----
> From: Greim, Michael [ <mailto:mgreim@mc.com>]
> Sent: Monday, June 19, 2000 12:58 PM
> To: 'Ben Manor'; ibis users
> Subject: RE: 74ALVCH16501 Ibis Model
>
>
> Here it is. It is can be found on the following site:
>
> <http://www.philipslogic.com/support/ibis/alvc/>
>
> Enjoy.....
>
> <<h16501t.ibs>>
>
> Best Regards,
>
> Michael
>
> > -----Original Message-----
> > From: Ben Manor [SMTP:Ben_Manor@mentorg.com]
> > Sent: Monday, June 19, 2000 10:37 AM
> > To: ibis users
> > Subject: 74ALVCH16501 Ibis Model
> >
> > Not in TI's site.
> > Does anyone has it?
> >
> > THANKS
> > --
> > ==========================================================
> > Ben Manor, Application Engineer - Mentor Graphics Israel
> > 41 Hagalim Blvd. P.O.B. 2155 Herzliya, 46120 Israel
> > Tel: +972-9-9552636 ext. 119 Fax: +972-9-9552627
> > email: Ben_Manor@mentor.com Mobile: +972-53-415412
> > ---------------------------------------------------------- << File: Card
>
> > for Ben Manor >>
>
Received on Mon Jun 19 12:35:02 2000