Stephen,
Thanks for your reply. I will keep your thoughts in mind.
Unfortunately, HSPICE is not appropriate for full board and system
simulations with 100's or 1000's of differential pair nets.
I expect to perform some spice to ibis extractions and
correlations to Hspice in the next week.
I will let the reflector know what the results of my work are.
regards,
scott
Stephen_Miller@ne.3com.com wrote:
> Scott: We've found that Spice (we use HSPICE) is the only thing that works
> correctly so far. Our IBIS-based simulators aren't quite up to this just yet.
> Hope this helps.
>
> Steve
-- Scott McMorrow Principal Engineer SiQual, Signal Quality Engineering 18735 SW Boones Ferry Road Tualatin, OR 97062-3090 (503) 885-1231 http://www.siqual.comReceived on Thu Mar 16 14:12:50 2000
This archive was generated by hypermail 2.1.8 : Fri Jun 03 2011 - 09:53:47 PDT