Kanal,
From within SPECCTRAQuest or Allegro, ensure that the "CLASS" of the
connector is set to "IO"; by default, it probably is set to "IC". Also,
ensure that the "PINUSE" is set to "UNSPEC" for each of the pins on the
connector. Then, from within the SPECCTRAQuest Model Assignment menu,
create or edit an/the IBIS Device, but ensure no IO buffers are assigned to
any pin (including, but not limited to CDSDefault*).
Regards,
Michael Cohen
Received on Mon May 22 08:28:47 2000
This archive was generated by hypermail 2.1.8 : Fri Jun 03 2011 - 09:53:47 PDT