Subject: Re: Execution of s2ibis2
From: Abdulrahman A Rafiq (arafiq@cisco.com)
Date: Fri Nov 23 2001 - 00:35:44 PST
Ramesh,
Is there an output file generated ? Can you open it in your basic text
editor and see what error message its flaging ?
Also see if you can open the .spi file and see if there are any messages in
there ?
Abbey A. Rafiq
At 12:35 PM 11/23/2001 +0530, Ramesh Karmungi wrote:
>Hello,
>
>I am new user of IBIS tools. I have downloaded Spitran to develop ibis
>models. Spitran gives me .s2i file. This was used as input file to run
>s2ibis2.exe. However, am unable to run s2ibis2. Following lines will
>appear on screen and stops execution of s2ibis2..
>
>s2ibis2: Analyzing component MCM Driver .
>s2ibis2: Starting HSpice job with input putout.spi.
>failure!!!!!
>
>I have noticed it creates a .spi file in the process.
>
>I work on PC with windows 2000 or windows NT system. I have Avanti HSPICE
>99.4.
>Could anyone help me out to sort out the problem.
>
>Thanks and Regards with anticipation
>
>Ramesh K
This archive was generated by hypermail 2b28 : Fri Nov 23 2001 - 00:58:40 PST