Re: [Q] Is there any EDA simulator accepting Connector IBIS?

Subject: Re: [Q] Is there any EDA simulator accepting Connector IBIS?
From: Perry Qu (perry.qu@alcatel.com)
Date: Wed Feb 20 2002 - 06:19:41 PST

Hi,

I think it will be more useful that the EDA tool can accept SPICE format of
connector models, as most of the model for connectors are in SPICE. I thought this
should be a fairly easy task for EDA tool vendors.

Regards

Perry

apanella@molex.com wrote:

> Charlie,
>
> The IBIS Connector Model (icm) specification is still under revision. The
> document that you downloaded is a work in progress. The specification will not
> be fully supported by simulators or model makers until the specification reaches
> at least level 1.0.
>
> The good news is that the level 1.0 is getting close.
>
> Depending on the simulator, there are some ways to get connector models into the
> circuit. Unfortunately, this can be simulator dependent.
>
> As such, the best bet is to see what kind of models does your simulator support,
> then see if the connector vendor has that type of model available.
>
> Best Regards,
> _gus
>
> -----Original Message-----
> From: "Charlie Park" <onion@mail.kaist.ac.kr>
> Sent: Tuesday, February 19, 2002 6:17 PM
> To: <ibis-users@server.eda.org>
> Subject: [Q] Is there any EDA simulator accepting Connector IBIS?
>
> Dear all of you,
>
> I am Charlie Park in KAIST, South Korea.
>
> I am very interested in the IBIS of connector and downloaded the latest version
> spec.
>
> But I am afraid that I can't find any way to simulate an example file(molex
> one)
> because every EDA tool
> accepts just the buffer IBIS format, normal one.
>
> How can I simulate the connector IBIS model?
>
> Please give me some advice or information about simulation tool accepting
> connector
> IBIS model.
>
> Thank you and have a nice day.
>
> Best regards.
>
> - from South Korea, Charlie 

--
Perry Qu

Product Integrity         |      600 March Road
Alcatel Canada            |      Ottawa, ON K2K 2E6, Canada

DID: (613) 7846720        |      FAX: (613) 5993642

This archive was generated by hypermail 2b28 : Wed Feb 20 2002 - 06:50:56 PST