Subject: RE: [IBIS-Users] Using the '.ibis' (note the dot) in HSPICE
From: Michael Dotson (dotsonmw@us.ibm.com)
Date: Wed Apr 10 2002 - 08:18:12 PDT
The confusion was coming from the 'Device Models Ref' manual decription of
the Hspice implementation of the 'automagic'
buffer instantiation when the ' .ibis ' command is used. From the
comments here, I understand that I need to stim whatever buffer I wanted to
look at.
Now that I realize that the 'bufn_#' is either an input or output node,
depending in the buffer type, I have been able to proceed forward.
Many thanks for the help,
Mike Dotson
IBM Endicott Worldwide Field Design Center 607-752-5379 (tl 852)
|------------------------------------------------------------------
|For help or to subscribe/unsubscribe, email majordomo@eda.org
|with just the appropriate command message(s) in the body:
|
| help
| subscribe ibis <optional e-mail address, if different>
| subscribe ibis-users <optional e-mail address, if different>
| unsubscribe ibis <optional e-mail address, if different>
| unsubscribe ibis-users <optional e-mail address, if different>
|
|or email a written request to ibis-request@eda.org.
|
|IBIS reflector archives exist under:
|
| http://www.eda.org/pub/ibis/email_archive/ Recent
| http://www.eda.org/pub/ibis/users_archive/ Recent
| http://www.eda.org/pub/ibis/email/ E-mail since 1993
This archive was generated by hypermail 2b28 : Wed Apr 10 2002 - 08:33:08 PDT